Cardboard Baler

Cardboard Baler

DP-36 Specifications

High Density Downstroke Baler - Compactor

Click here to view drawing of our NEW high density downstoke baler with side mounted power unit

GENERAL EQUIPMENT SPECIFICATIONS
Dimensions	Depth 35" Width 48" Height 107" (top of cylinder)
Compaction force (normal)	39,200lbs
Compaction force (max)	47,124lbs
Ram face dimension	36"W x 24"D
Ram face pressure (normal)	45 psi
Ram face pressure (max)	55 psi
Cycle time	40 sec
Unit weight	1575 lbs
Baler meets or exceeds ANSI Z245.5 safety standards.
Baler uses readily available, nationally and internationally distributed components.
Baler is assembled from at least 95% American made components.

BALE SPECIFICATIONS
Bale size	24"D x 20"H x 36"W
Bale weights	250 to 350 lbs - OCC 250 lbs - P.E.T 255 lbs - HDPE 245 lbs - ALUMINUM 270 lbs - PAPER

HYDRAULIC SYSTEM SPECIFICATION
Motor (hp) (rpm) (voltage)	5 1750 208/230/480 VAC 60Hz Three phase (220 volt single phase is optional)
Pump (type)	Rotary vane positive displacement
System pressure (normal) (max)	2000 psi 2400 psi
System design pressure	2500 psi
Cylinder (bore) (stroke) (rod)	5" 34" 3"

The system is completely self contained within the baler. The power unit has the following features: 20 micron filtering system, soft shift
directional valve, and oil heater port.

PAINT SPECIFICATIONS
Primer	Rust inhibiting bottom coat, 2 mil thickness
Paint	Industrial enamel, high solids, 4 mil thickness

For further compactor, baler, and drum crusher information, please call or fax us at the numbers below.

FREE Quotes! Click here

Baler Network - Cardboard Baler Sales
2319 Harrow Gate Drive
Barrington, IL 60010
(847) 382-0766 Phone
(847) 382-8913 Fax
Email Us at: machining-mfg.services@comcast.net